FEATURE

Complete Intellectual Design

Automatic Exposure Control (AEC) detects the lacteal gland area with precision and controls the tube voltage and the mAs value automatically.

Flexible automatic compression makes it possible to automatically adjust the compression force on the breast to an appropriate value, which makes it possible to improve patient comfort.

Optimal Image Quality  

In order to obtain high resolution image at lower dose, a variety of characteristic curves were validated by clinical which were assembled to enhance the contrast grade and reduce the impulse noise of image, this is the best way for mammary screening.

Flexible automatic compression makes it possible to automatically adjust the compression force on the breast to an appropriate value, which makes it possible to improve patient comfort.

Prospective X-ray Tube Technology with Tungsten Target    

l High X-ray energy

l Strong penetrability

l Low dose, high quality image

l Trend of mammography technology

New Generation of Flat Panel Detector (FPD)

l 240 mm × 300 mm, full-field FPD

l High limiting resolution

l Wide  dynamic range

l Low dose

Isocentric Rotation

Full of humanity design，downy lines as well as smooth the appearance of this Digital Mammography even more warmth.

The examination position was the center of rotation, which is a  Ergonomically Designed and fully meet the requirements of clinical breast examination.

One Key in Position

C-Arm automatic motion to preset position by one button and would auto-stop.

Indicate lamp automatically illuminates, eliminating the need for a separate power switch, very easy to control and also with user friendly design.Friendly Software Interface

Friendly Software Interface

The software possesses of friendly interface and strong ability of human-computer interaction.

Configuration: including system, study and user management. Especially the configuration for work list and storage

In order to get a high quality image, some parameters were provided for user to adjust.

MAIN PART

Main Unit

Flat Panel Detector

High Voltage Generator

X ray Tube Assembly

Collimator

Image Workstation

SPECIFICATION

Flat Panel Detector: FPD400

Pixel Area: 24 cm × 30 cm

Receptor Type: Amorphous Silicon

Pixel Pitch: 85 μm

Image Preview: 9s

Image Time(including Processing): 10s

Limiting Resolution: 6 lp/mm（Nominal data）
7 lp/mm（Typical value）

A/D Conversion: 14 bit

Pixel Matrix: 3528 × 2816

Data Output: Gigabit Ethernet

Weight: 3.8 kg

High Voltage Generator: VMX40P5X4297

Nominal Mains Voltage: 200-240 V AC

Output Power: 5 kW

mA Range: 10 ~ 160 mA

kV Range: 20 ~ 40 kV

mAs Range: 2.5 ~ 630 mAs

ms Range: 16 ~ 10000 ms

Autocorrection: YES

Error Log: YES

Automatic Overload Protection: YES

X-ray Tube: C339V(XM15T)

Maximum Tube Current: 160 mA

Focal Spot: Small Focus: 0.1 mm
Large Focus: 0.3 mm

Anode Angle : 15°

Anode Marerial: RT-TZM/tungsten target

Anode Speed: 10000 rpm

Input Energy(at 0.1s) Small Focus: 4 kW
Large Focus: 16 kW

Operating Tube Voltage: 20 ~ 49 kV

Anode Heat Storage Capacity: 300 Khu

C-Arm

C-Arm Rotation Mode: Motor, 10°/s

C-Arm Rotation Range:  -165°~+180°

C-Arm Vertical motion Mode: Motor, 35 mm/s

C-Arm Vertical motion Range: 65~140 cm

Armrests that provide the sense of security are mounted so as to decrease patient's unpleasantness at the positioning.

Compression Plate

Compression Plate Vertical motion Mode: Motor: 20 mm/s
Manual: 10 mm/s

Compression Plate Vertical motion Range:≥25 cm

Foot switch: 2

Compression Plate Release Modes: Full-anto Release/Emergency  Release/Foot Switch Release/Manual Release

Compression Modes: Flexible Compression

X ray Collimator

Illumination:≥160 LUX(SID=65 cm)

Light Source Delay Time: 30 s

Grid

Interspacer Marerial: Carbon Fiber

Cover Plate Marerial: Carbon Fiber

Focal Length: 65 cm

Aspect Ratio : 5：1

Line Density: 41 L/cm

Size: 246 mm × 338 mm

External Dimension

External Dimension(Length × Width × Height) : 660 mm × 945 mm × 2030 mm

Call Intercom System

Automatic Playback: YES

Voice Talkback: YES

Recording: YES

Software System

Image Browser: Image selection, image processing (crop, zoom, grayscale adjustment, rotate, flip, tag, window layout etc.)

Image Post-Processing: Image enhancement, tissue equalization, noise reduction, gray level stretching

Image Output: Support for Laser printer output, laser camera output, Dicom interface and hard disk

Data Management: Data deletion, statistics, edit, backup and restore

Other features: Detector calibration procedures, failure report function, worklist module, dynamic password maintenance, machine using period limiting setting ,report writing and printing etc.

PC System

Display: Lenovo LCD, LT1953wA, 19inch

CPU:≥Intel Core i3-3240

RAM: 4GB DDR3

Hard Disk: 500GB

Graphics card: Integrated graphics card

CD-ROM: DVD-R/W

Net Card: 100/1000Mbits NIC

USB: 6 USB 2.0

Extend: 2PCI+1PCIE+1PCIE*16

OS: WINDOWS 7 32bit